[Full Dumps Series] Useful Cisco tshoot Exam 300-135 Dumps PDF Download on Youtube for Troubleshooting and Maintaining Cisco IP Networks

Is Cisco 300-135 dumps exam really hard? “Troubleshooting and Maintaining Cisco IP Networks” is the name of Cisco 300-135 exam dumps which covers all the knowledge points of the real Cisco exam. Useful Cisco tshoot exam 300-135 dumps demo download on Youtube for Troubleshooting and Maintaining Cisco IP Networks. Pass4itsure Cisco 300-135 dumps exam questions answers are updated (118 Q&As) are verified by experts.

The associated certifications of 300-135 dumps is CCNP Routing and Switching. The New 300-135 dumps can help you to figure out the actual area where you are confused. New https://www.pass4itsure.com/300-135.html dumps will turn your study into the right direction.

Exam Code: 300-135
Exam Name: Troubleshooting and Maintaining Cisco IP Networks
Q&As: 118

[Full Cisco 300-135 Dumps Series From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWVjNzVmpXTDBzU00

[Full Microsoft 70-414 Dumps Series From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWT1R2UXFwcFMwZEE

300-135 dumps

Up to the Immediate Present Cisco 300-135 Dumps Exam Cram:

QUESTION 5
Which of the following statements best describe MPLS fast reroute characteristics? (Choose two)
A. Fast reroute requires you to manually define detour paths.
B. Fast reroute provides path protection close to the failure point
C. Fast reroute performs automatic path calculation and signaling.
D. Fast reroute protects both primary and secondary paths.
300-135 exam Correct Answer: BC
QUESTION 6
During node protection signaling, the PLR knows the address of the MP from which of the following
methods?

A. The PLR issues a RSVP path message to the destination router to request the address of the MP.
B. The PLR learns the address of the MP from the ERO.
C. The PLR learns the address of the MP from the RRO
D. The PLR learns the address of the MP from the targeted RSVP hello message.
E. The PLR does not need to know the address of the MP.
Correct Answer: C
QUESTION 7
What is the significance of receiving a packet with the bottom MPLS label S bit set to 1?
A. It results in forwarding based on the next packet header.
B. It indicates that the label is the bottom of the MPLS label stack.
C. It indicates that the label is the top of the MPLS label stack.
D. Any LSR that receives an S bit set to 1 must discard the packet.
300-135 dumps Correct Answer: B
QUESTION 8
Which command can be used to verify the LDP settings for label distribution and retention?
A. show router ldp default
B. show router ldp parameters
C. show router ldp settings
D. show router mpls settings
E. show router mpls label-options
Correct Answer: B
QUESTION 9
Router R3 signals an LSP, reserving 1Gbps bandwidth on a 10Gbps link. RSVP configuration limits
reservable bandwidth to 20 percent on the egress interface. Which of the following statements is true?
A. The egress RSVP interface has 80 percent bandwidth unreserved.
B. LSPs can reserve an additional 9.9 Gbps bandwidth on this RSVP interface.
C. The head end reserves 100Mbps for the LSP
D. The egress RSVP interface has 1 Gbps bandwidth unreserved.
300-135 pdf Correct Answer: D
QUESTION 10
Click on the exhibit button below.
Assuming that LSP R1-R2-R3 requests the default fast reroute configuration, which router becomes a
DMP for the detour tunnels?
A. Router R1
B. Router R2
C. Router R3
D. Router R4
E. Router R5
Correct Answer: E
QUESTION 11
Which of the following message types does RSVP use to set up an LSP? (Choose two)
A. Path message
B. iLER message
C. Resv message
D. LSP setup call request
E. eLER message
300-135 vce Correct Answer: AC
QUESTION 12
Assume that, on the Alcatel-Lucent 7750 SR, an LSP is configured with one-to-one FRR and node
protection. Which of the following statements are FALSE? (Choose two)
A. Each PLR signals a detour LSP that avoids the downstream node. If the downstream node cannot be
avoided, a detour LSP that avoids the downstream link is signaled.
B. The detour LSP can take one or more hops before merging back on the protected LSP.
C. The merge point of the protected LSP must be the next-next-hop node
D. The ingress router will set the local protection desired flag in the session attribute object of the path
message to inform all routers along the protected LSP path to establish detour LSPs.
E. The label recording desired flag must be set in the session attribute object in order for the PLR to know
what label to swap when using the detour LSP.
Correct Answer: CE
QUESTION 13
Click on the exhibit button below.
With fast reroute enabled, and given the following:
The protected LSP path is R1-R2-R3.
All links are of equal cost.
Which of the following statements is true? (Choose two)
A. Router R1 is the LSP originator and is also a PLR.
B. With one-to-one link or node protection, the detour LSP path is R1-R4-R5-R2-R3.
C. With one-to-one link or node protection, the detour LSP path is R1-R4-R5-R3.
D. If the R2-R3 link fails, router R3 becomes a PLR
E. None of the nodes can be protected with FRR.
300-135 exam Correct Answer: AC
QUESTION 14
Which of the following statements regarding LSP path configuration are true? (Choose three)
A. The path must include at least one hop.
B. The path may be used multiple times in a single LSP.
C. The path may comprise loose hop entries only.
D. The path must define the LSP’s tail end.
E. The path may be used for multiple LSPs.
Correct Answer: CE
QUESTION 15
Click on the exhibit button below.
Consider the following:
Routers R1 and R4 are in Area 1.
Routers R4 and R5 in Area 0.
Routers R5 and R3 are in Area 2.
To support LDP-over-RSVP tunnels between routers R1 and R3 over path R1-R4-R5-R3, with which
routers will router R5 require targeted sessions? (Choose two)
A. Router R1
B. Router R4
C. Router R2
D. Router R3
300-135 dumps Correct Answer: BD
QUESTION 16
Which of the following statements best describes downstream unsolicited label distribution?
A. An LER may answer requests for label mappings immediately, without waiting for a label mapping from
the next-hop.
B. An LER may advertise label mappings to all peers for which it might be a next-hop for a given FEC.
C. An LER propagates a label mapping downstream for a FEC. only if it has a label mapping for the FEC
next-hop.
D. An LER will only distribute a label for a FEC when it has been requested to do so.
Correct Answer: B
QUESTION 17
In MPLS, labels are distributed in the opposite direction of the data flow.
A. TRUE
B. FALSE
300-135 pdf Correct Answer: A
QUESTION 18
Click on the exhibit button below.
Given the configuration below, what is the system ID of the destination node?
A. 10.32.1.2
B. 10.1.478
C. 1048.1.1
D. Cannot tell from this configuration
E. 10.1.2.2
Correct Answer: B

I believe after several times of Cisco 300-135 dumps  practice, you will be confident to face your actual test and get your Cisco https://www.pass4itsure.com/300-135.html dumps certification successfully.

Read More Youtube:https://youtu.be/K2S9iwgc3BY